![[spacer]](../images/htblock.gif) |
Note: Effective August 1, 2003, Central Michigan
University will begin gradual phase-out of the dial-up services. Under the
reduced service plan, CMU will preserve dial-up Internet access for all users in
the local calling area. Statewide Internet access will no longer be available.
Local users may access the university network by dialing 774-2224. See
ISP FAQs and Local
ISP List for replacement service information.
Follow this procedure to configure Windows 2000 for the dial-up
connection to CMU. There are three parts:
1)
the network connection,
2) TCP/IP settings, and
3) DNS settings.
Setting up the network connection:
- On the desktop, click Start > Settings > Control Panel, and then double-click
Network and Dial-up Connections.
- Inside the “Network and Dial-up Connections” window, double-click on Make
New Connection.
- Click Next in the Network Connection wizard. Be sure to click "Dial-up
to private network" when you are asked to choose a dial-up type.
Click Next, then enter the phone number you are dialing. This is
774-2224 if you are in the Mt. Pleasant area. If you are on campus, the number
is 2224.
|
Please be aware that long-distance charges may apply if you are
connecting to a dial up number outside your local toll-free calling
area. Your local telephone service provider can determine if a dial-up
number will incur long-distance charges. CMU cannot be held responsible
for charges incurred from connecting to dial-up services. |
Click Next, then make sure For all users is checked.
Click Next, then click Finish.
Setting up TCP/IP:
- On the desktop, click Start > Settings > Control Panel, and then double-click
Network and Dial-up Connections.
- Double-click on your connection icon (for example, CMU) and go to Properties-Networking.
- Check to see if TCP/IP is listed. If it is not, click Install
> Protocol > Add > TCP/IP.
- Check to see if "Client for Microsoft Networks" is installed. If not, click
Install > Client > Add > Client For Microsoft Networks.
Setting up DNS numbers:
- On the desktop, click Start > Settings > Control Panel, and then double-click
Network and Dial-up Connections.
- Right-click on your connection icon (for example, CMU), then go to Properties.
Click on the Networking tab.
- Highlight "Internet Protocol (TCP/IP)" and click Properties.
- Check "Obtain an IP address automatically".
- Click OK.
After you have set up your dial-up properties, double-click on your
connection icon (for example, CMU) and enter your Global ID and password. Your Global
ID has the format: globalid@cmich.edu
For example: smith1al@cmich.edu
If you do not know your global id or password, contact the Information
Technology Help Desk at (989) 774-3662.
Click Dial to make the connection.
Receiving Additional Help
For additional information about information contained in this Quick Guide,
please contact the Help Desk at 774-3662 or email
helpdesk@cmich.edu.
|
|
![[spacer]](../images/bg-transp.gif){kind=small}